Nose sections are hollow and are direct replacements for the kit parts. No modification to the kit is needed. 

Also included are a piece for the forward nose wheel well, 2 x pitot tubes, 1 x CN18 antenna, 2 x AOA probes, 1 x ALR-67 antenna and 1 piece to depict the vent on the bottom aft portion of door 3. 

Like most of our other items, these will be removed from the print supports prior to curing and packaging. All you will need to do is lightly sand the mating surface to remove the remnants of the support nibs.

**Beginning with BuNo 164279, Door 200 was added to the starboard side, and is located immediately forward of the ground refueling point door. Behind this door were the circuit breakers for the ATARS system, which could be fitted to any F/A-18D beginning with this BuNo. 

CAD by Peter Fidloczky